Sony LCX167A BL Genuine LCD Panel – 1.67″ – Original Spare Part
This listing is for one genuine Sony LCX167A BL LCD panel. This 1.67-inch LCD imaging chip features a resolution of 1376 x 1024 pixels and is the original spare part for select Sony projectors. Each projector uses three panels—Red, Green, and Blue—which share the same physical form factor. Please confirm the color position you need before ordering.
Bare panel only – no housing or alignment tool included. Replacing an LCD panel requires careful disassembly and precise optical alignment. Professional installation is strongly recommended.
Important: Select the Correct Color
Every 3LCD projector uses three identical-sized panels: Red, Green, and Blue. Each panel is factory-calibrated for its specific color channel. When ordering, please specify which color you need (R, G, or B). If unsure, check the ribbon cable label or note which position the old panel was removed from. The green panel is typically located in the center of the optical block, and the blue panel (closest to the heat source) often fails first.
How to Confirm Your Panel
- Model number: Look for “LCX167ALB” printed on the ribbon cable or metal frame of your original panel.
- Color identification: Red = left side (viewed from lens), Green = center, Blue = right side.
- Label worn? Send us a clear photo of your original panel and we will help verify the model and color at no charge.
Final confirmation before you order: To guarantee a 100% match, please verify the model number on your original panel reads LCX167ALB, and confirm the color position (R/G/B). If unsure, contact us with a clear photo—we will verify the correct part for you.
365-Day Replacement Warranty
Full 365-day warranty against manufacturing defects.
Fast, Tracked Shipping
Ships promptly with tracking. Packed in anti-static protective packaging to prevent damage during transit.
Select your color from the dropdown above and restore your Sony projector’s image to factory quality.
