Optoma HD11 Color Wheel Replacement– Original 6‑Segment RYGCWB
If your Optoma HD11 has started acting up – sudden shut‑downs, a grinding noise that changes with brightness, rainbow flicker, or colors that look completely off – don’t write off the whole projector. Nine times out of ten, the color wheel is the culprit. This new original HD11 color wheel is the exact replacement that gets you back to movies and games.
It’s not a refurbished pull from some other machine. Not a cheap replica with coatings that fail after a month. Factory glass, original mirror coating, proper dynamic balance – just like the one Optoma installed when your HD11 was new.
| Compatible Model | Optoma HD11 (1080p home cinema) |
| Condition | New & Original (not refurbished) |
| Segment Configuration | 6 segments – RYGCWB |
| Rotation Speed | As originally designed (typical 4x or 5x – check your old wheel label) |
| Installation | Direct replacement – same mounting holes & flex cable |
Why the exact RYGCWB sequence matters
The HD11’s DLP timing is hard‑coded to Red‑Yellow‑Green‑Cyan‑White‑Blue. The white segment boosts brightness for everyday viewing, while cyan helps with more natural color in video. Swap in a wheel with a different order (like RGBRGB or RYMGBC), and the projector either fails its self‑check or gives you permanently wrong colors. This original wheel is what Optoma designed – no substitutes work.
Real‑world signs your HD11 color wheel is failing
- Auto shut‑down – powers off seconds after the lamp lights (self‑test failure).
- Mechanical noise – constant whining, grinding, or rattling that changes with brightness.
- Flicker / rainbows – flashing picture or color trails on fast motion.
- Abnormal colors – skin tones look green, reds turn orange, whites have a pink tint.
Replacing the old wheel with this genuine part fixes all of that in one swap.
Restore your HD11 – not the whole projector
Swapping the color wheel is a straightforward job. The new wheel mounts exactly to the original screw holes, and the flex cable clicks right in. Fresh bearing = silence. Factory balance = no vibration. Correct colors = back to movies. Don’t scrap a perfectly good DLP chip and lamp – just change the one part that wears out.
Note: Compare this wheel’s diameter and segment pattern with your old one. Send us a photo if you’re unsure.
Reviews
There are no reviews yet.