Optoma TH1020 color wheel replacement – original 5-segment RYGWB design.
If your projector shuts down after startup, makes grinding or whining noise, shows rainbow flicker, or produces incorrect colors, the issue is almost always a worn color wheel. This new original TH1020 color wheel restores proper operation quickly and reliably.
This is not a refurbished pull or low-quality copy. It features factory glass, original mirror coating, and proper dynamic balance — built to the same standard as the original Optoma part.
| Compatible Model | Optoma TH1020 |
|---|---|
| Condition | New & Original (not refurbished) |
| Segment Configuration | 5 segments – RYGWB (Red, Yellow, Green, White, Blue) |
| Rotation Speed | As factory designed (verify with original part if needed) |
| Installation | Direct replacement – original mounting & flex cable |
Why the correct RYGWB sequence matters
The TH1020 is calibrated for a specific RYGWB color sequence. The white segment increases brightness, while yellow and green maintain balanced color output. Using a different configuration may cause startup failure or incorrect colors.
Common failure symptoms
- Auto shut-down after power-on
- Grinding or high-pitched noise
- Flickering image or rainbow artifacts
- Distorted or inaccurate colors
Simple repair, full recovery
Installation is straightforward. Mounting points align perfectly and the connector matches your original unit. A new bearing eliminates noise, and proper balance restores smooth operation. Replace the worn component instead of the entire projector.
Tip: Verify segment pattern and size with your original wheel. Contact us with photos if unsure.




Reviews
There are no reviews yet.