H651 (Epson Part V11H651053) – 0.61-Inch HTPS LCD Panel for Epson TW6200/TW6600 Series
The H651 (Epson part number V11H651053) is a genuine HTPS (High Temperature Poly-Silicon) LCD panel designed for select Epson 3LCD home theater projectors, including the EH-TW6600, CH-TW6600, and CH-TW6200. This 0.61-inch panel with MLA (D9.8, C2Fine, 12Bit) delivers full native 1080p resolution (1920×1080) and is a core component responsible for the projector’s bright, vibrant, and artifact‑free image.
artsWithSingle bare LCD panel – requires optical realignment after installation
| Part Number / Marking | H651 / V11H651053 |
|---|---|
| Compatible Projector Models | Epson EH‑TW6600, CH‑TW6600, CH‑TW6200 (and visually identical units) |
| Display Technology | 3LCD / HTPS – High Temperature Poly‑Silicon (C2Fine) |
| Panel Size | 0.61 inch diagonal with integrated micro‑lens array (MLA) |
| Native Resolution | 1080p (1920×1080) – each panel carries one color channel |
Why This Panel Fails
Over hundreds or thousands of lamp hours, the polarizer films and HTPS glass in Epson’s 3LCD home theater projectors gradually degrade due to prolonged heat and UV exposure. When this happens, the typical symptoms include:
- Persistent yellow, green, or pinkish color tint across the whole image
- Uneven brightness or “burned” patches that a new lamp does not cure
- Blurred or foggy areas, especially near the corners
- Vertical lines, dead rows, or complete loss of one color channel
- Noticeable drop in overall image sharpness and contrast
If your TW6600 or TW6200 has developed any of these issues despite having a fresh lamp and clean optics, one or more of the internal H651 LCD panels is almost certainly degraded. Replacing the faulty panel (or all three at once) is the only way to restore original factory image quality.
Replacement Options & Installation Notes
This listing is for a single bare H651 LCD panel. Because the 3LCD optical engine requires extremely precise convergence of the red, green, and blue channels, installing a single panel requires:
- Full disassembly of the optical block
- Professional optical alignment equipment (or extensive manual convergence adjustment)
- Advanced soldering skills for the flex cable connections
For most non‑professional users, we strongly recommend sourcing the complete pre‑aligned RGB LCD assembly (all three panels factory‑converged on the prism block), which can be swapped as a single drop‑in module without any realignment. Contact us before ordering if you are unsure which option your repair requires.
Before ordering: Confirm that your projector uses H651 panels. The part number is typically printed on the flex cable of each LCD block. If you are unsure, send us a clear photo of your existing panel or optical assembly, and we will check compatibility for you.
