Genuine Epson EB‑Z8455WU LCD Panel – Single Panel Replacement
This is a brand new, genuine Epson LCD panel (single panel) designed for the EB‑Z8455WU high‑brightness projector. If your projector shows colour tint, dead pixels, or uneven brightness from a specific colour channel (red, green, or blue), replacing the faulty LCD panel is often the most effective repair.
Important – not a complete LCD block: This listing is for one individual LCD panel. It does not include the prism or the other two panels. Replacing a single panel requires mechanical convergence adjustment (X/Y/Z alignment) and typically needs software‑level correction. This repair is for experienced technicians only. If you are not comfortable with 3LCD optical alignment, please use a professional service centre.
| Compatible Projector Model | Epson EB‑Z8455WU |
|---|---|
| Part Type | Single LCD panel (0.94″) – order by colour channel (Red, Green, or Blue) |
| Condition | Brand new, 100% original Epson spare part (not refurbished, not pull) |
| What’s Included | One LCD panel only. Reuse your original flex cables, polarisers, and mounting frame. |
| Warranty | 90‑day replacement warranty against manufacturing defects |
| Shipping | Same‑ or next‑business‑day dispatch. Express shipping available at checkout. |
Signs you need this LCD panel
- Strong red, green, or blue tint covering the whole image
- Vertical stripes / dead pixels in one colour only
- Burned‑looking spot or haze on the panel surface (visible after opening)
- Missing one colour channel even after checking cables and driver board
Ordering – please specify colour
The EB‑Z8455WU uses three LCD panels: Red (R), Green (G), and Blue (B). When placing an order, please leave a note at checkout telling us which colour panel you need. Without this information we cannot ship the correct part.
✔ Genuine Epson – no compatibility guesswork
✔ Exact fit for EB‑Z8455WU optical block
✔ Fast handling & tracked shipping
✔ 30‑day defect warranty
✔ Responsive after‑sales support
Installation – experienced technicians only
Replacing a single LCD panel on a 3LCD projector is an advanced repair. After physically installing the new panel, you must adjust convergence (X, Y, Z axes) and often perform software‑based panel alignment. If you have not done this on an Epson large‑venue projector before, we strongly recommend sending the projector to an authorised repair centre.
Shipping & returns: We dispatch orders within 24 business hours (excluding weekends). All international shipments include tracking. Returns accepted only for defective parts – please contact us first with photos of the issue.
Questions? Message us with a photo of your original LCD panel and its colour label. We will confirm compatibility before you order.
