Original LCX120A LCD Panel for Sanyo PLC-HF10000 / PLC-HF10000L Projectors
The LCX120A is a genuine 2K LCD panel used inside the optical block of the Sanyo PLC-HF10000 and PLC-HF10000L installation projectors. Designed for large venue applications, this panel plays a critical role in image formation and directly affects colour accuracy, brightness uniformity and overall picture quality.
Unlike common projector maintenance items such as lamps or filters, an LCD panel is part of the optical engine itself. Replacing a damaged panel requires complete access to the optical block and should only be performed by experienced projector repair technicians.
| Compatible Models | Sanyo PLC-HF10000 / PLC-HF10000L |
|---|---|
| Part Number | LCX120A |
| Native Resolution | 2048 × 1080 (2K) |
| Condition | Brand New Original |
| Application | Optical block LCD imaging panel replacement |
| Package Contents | Single LCD panel only |
Typical Failures Caused by a Defective LCX120A Panel
- Permanent colour imbalance that remains even after lamp replacement or factory reset.
- Visible burn marks caused by long-term high brightness operation.
- Dark patches or uneven illumination across the image area.
- Dead or stuck pixels visible during test pattern projection.
- Loss of image uniformity especially noticeable on white or grey backgrounds.
- Colour contamination affecting only one image channel.
Designed for Professional Installation Projectors
The PLC-HF10000 series was developed for auditoriums, simulation systems, museums, rental staging and other demanding professional environments. Because these projectors operate at high brightness levels for extended periods, LCD panel degradation can eventually occur even when routine maintenance is performed correctly.
Replacing a failed LCX120A panel allows technicians to repair the optical engine without replacing the complete optical block, helping reduce maintenance costs while restoring image performance.
Installation Requirements
This replacement is intended for qualified service personnel familiar with 3LCD optical systems.
- Optical block removal required.
- LCD mounting frame disassembly required.
- Dust-free working environment strongly recommended.
- Optical alignment should be verified after installation.
- Image quality should be checked using convergence and uniformity test patterns.
Improper installation may result in colour fringing, optical contamination, convergence issues or image distortion.
Compatibility Verification
Before ordering, please confirm that the original LCD panel is marked LCX120A and that your projector model is PLC-HF10000 or PLC-HF10000L.
If you are uncertain, send us clear photographs of the LCD panel label and optical block assembly. We will help verify compatibility before shipment.
